A Laboratory Manual For Embedded System (22352)
Introduction -
| Subject - Embedded System |
| Subject Code - 22532 |
| Branch - Diploma in Electronics & Communication Engineering |
| Scheme - I |
Hello students welcome to Msbte Store if you are searching 22532 - Embedded System Lab manual answer then this post for you.
The Lab Manual Answer PDF is free up cost.You Don't have to pay for lab manual answer pdf in our website MSBTE Store. Msbte Store provide you Diploma all study materials such as MSBTE Blank Lab Manual, Lab Manual Answer, MSBTE Syllabus pdf, MSBTE Notes pdf, You can get all study materials of MSBTE.
The subject code of this subject is 22532 & Subject name is Embedded System
Note - Please Confrom the Subject code as well as Subject name before writing manual answer in your Blank Lab Manual.
List of Practicals in 22532 - Embedded System Lab Manual
1. Identify the pins of 8051 and AVR microcontrollers.
2. Identify the
feature of PIC pins and microcontrollers.
3. Identify the features of ARM microcontroller on the basis of IC number.
4. Use Integrated development environment tool for
developing embedded C' programs (Using
MicroProC/Keil).
5. Execute the 'C' program to perform following
arithmetic operations on 8-bit data: addition,
subtraction, multiplication and division.
6. Develop and Test the C' program to perform
following arithmetic operations on 16-bit data:
addition, subtraction.
7. Develop and Test the 'C° program to perform data
transfer from source to destination (Use internal data
memory locations).
8. Interface RS232 connector to PC using MAX232
IC.
9. Develop and test the 'C' program to turn on LED
(S) with key (S) press.
10. Interface 89C51/AVR microcontroller and write the
C program to display numbers from 0 to 9 on 7-
segment display with specified delay.
11. Interface 89C51/AVR microcontroller and write C
program to display string on given 16 x 2 LCD
12. Interface 89C51/AVR microcontroller and write 'C'
language program to read key code from 4 x 4
matrix keyboard and LCD display.
13. Interface 89C51/AVR microcontroller and write C
program to convert analog signal into digital form
using given 8 bit ADC and store the converted
digital data in memory.
14. Interface 89C51 and write C program to generate
square and saw tooth waveforms using given 8 bit
DAC.
15. Interface 89C51 /AVR microcontroller and write C
program to rotate stepper motor with different
speeds in clockwise and counter clockwise
direction.
16. Interface 89C51 and write C program to observe the
real time status of control signals for the given
waveform generated using DAC ( Use IDE tool
MicroProC/Keil).
Read 22532 - Embedded System Lab Manual Answer Online -
Note - Please check the page no. of Lab Manual Answer before writing.This Lab Manual is for reference only Lab Manual Answer is not provided by MSBTE.